High performance 

Suitable for working on slope below 10°and field over 1.5m sugarcane planting row spacing. 

Flexible floating crawler chassis,

The 460mm flat crawler chassis is suitable for the soil with maximum mud foot depth of 20cm and ridge height of 30cm.

Three-section bended conveyor, quick release structure that straight and bend type can be easily

converted according to requirements to adapt to different truck height and ensure uniform unloading.

6 cylinder high pressure common rail Cummins engine with strong power,

low fuel consumption and reliable performance.

Front feed roller is driven by two hydraulic motor, enhanced cane grabbing ability;

optimized conveying roller with new teeth surface, cane feeding, leaves and trash removing ability is largely increased.

Extractor is driven by one independent hydraulic motors; direction can be freely adjusted by 180° steplessly;

enlarged extractor and optimized structure ensure that impurities are better blown to the ground and the effect of impurity removal is better.

The machine frame adopts a new generation of patented technology, increasing the space of sugarcane discharge,

which can effectively solve the problem of harvesting clogging under the condition of high yield of sugarcane.

Topper system including dividing disc and cutter disc, Topper’s drums gather and cut the tops efficiently,

cut off top in one piece and spread out the tops away from the unharvesting rows,

which avoids tops second time harvesting and decreases impurity rate.

Bidirectional spiral rollers,

which are independent of each other when it is undulating on the left and right and making sugarcane splitting.

They move up and down, back and forth respectively to adapt to the sugarcane with

different lodging postures according to the actual status of sugarcane in the field. 

Intelligent control 

The system of harvester adopts software control, which can effectively monitor the real-time data from the sensors,

achieving malfunction diagnosis intelligently; 

Newly added line-keeping system can ensue machine stay in row when harvesting,

machine can move steadily. 

Liquid indicator is placed in cab and by observing that operator can conveniently control

basecutter height to meet different height requirements of ratoon cutting.

By setting the controller, harvester does not work within five minutes,

the controller will automatically input the “idle speed” command to engine through the CAN bus,

and the engine will enter the idle state to reduce the fuel consumption of the machine;.

Water tank and hydraulic oil tank adopts concentrated heat radiator;

Wind speed of radiator fan can achieve automatic adjustment according to the changing of the environment;

radiator fan can rotate reversely to automatically clean debris in order to ensure normal operation of the engine. 

Cozy operation 

The hydraulic motors of sugarcane harvester can realize one-key operation through the buttons

on CAN panel so that the operation is more accurate and comfortable.

For example, basecutter feeding system and unloading system.

Harvester’s all transmissions are controlled by hydraulic joystick,

and the forward/reverse operation is more comfortable. 

Luxury air-conditioned cab, good cooling performance;

front windshield enables good vision, adjustable seat used, driving is cozier. 

Reliable 

The hydraulic system configuration of the whole machine is newly upgraded and the power distribution is optimized.

With dual 75cc large displacement traveling plunger pumps,

the traveling capacity is increased by 50% compared with the previous model,

the maximum traveling speed can reach 10km/h, the conveying capacity is increased by 30%,

and the harvesting efficiency higher.

Heightened air filter, position is optimized, which is built into the integrated raditor,

and the normally closed muffler has strong moisture resistance function to ensure that the harvesting performance in the rainy season is not affected.

Wire-rope cylinder-pull conveyor structure and reinforced conveyor base make the whole machine safer and more stable.

The load-sensitive hydraulic system can automatically control the km/h flow distribution to

meet the dynamic load requirements of the whole machine.

All electrical components are selected from European and American imported brand suppliers.

The connectors are waterproof, dust proof and anti-loose, and the wire harness quality is reliable.